Stormsure Glue Flexible 5 g

Product detailed description

It is suitable for nylon, fabric, rubber, plastics, polyurethane, leather, metal, and fiberglass. The adhesive dries slowly, is flexible, and is completely waterproof, airtight, and abrasion-resistant. It is excellent for sealing leaking seams. However, it does not adhere to Silnylon at all... that’s a classic—only silicone or Silnet from McNett sticks to Silnylon.

The adhesive remains very flexible and forms a flexible patch on its own.

Instructions for use: 

Clean off any dirt with soap and water. If necessary, degrease with alcohol and apply a thin layer of adhesive directly to the tear and approximately 5 mm around the damaged area. Stormsure will be touch-dry in 2–4 hours. Allow to cure for 10–12 hours for best results. For more demanding repairs, use multiple layers of adhesive.

Filling small holes and cracks - Cover the hole from the front side with a piece of duct tape and apply a layer of adhesive from the other side, extending at least 5 mm beyond the edge of the hole. Once dry, remove the duct tape. The hole will be sealed, and there will be no patch visible from the front side.

When finished, squeeze out any excess air from the tube and store in a cool place. You can even keep it in the fridge.

You can find a whole range of repair tutorials on YouTube, e.g., here

If you prefer reading, you can find two practical repair guides at here.

You can purchase a pack containing three 5g tubes and a comprehensive guide, or buy a single 5g tube separately. For quick repairs on the go, the extra-sticky Stormsure Tuff Tape

The adhesive is very versatile, but it doesn't stick to Silnylon!